9.5.1.2 Packet Tracer – Putting it All Together Answers

9.5.1.2 Packet Tracer – Putting it All Together Answers

Packet Tracer – Putting it All Together (Answers Version)

Answers Note: Red font color or gray highlights indicate text that appears in the Answers copy only.

Topology

Addressing Table

Device Interface IP Address Subnet Mask Default Gateway
R1 G0/1 209.165.201.1 255.255.255.224 N/A
S1 VLAN 1 209.165.201.2 255.255.255.224 N/A
Server NIC 209.165.201.30 255.255.255.224 209.165.201.1

Background / Scenario

This activity includes many of the skills that you have acquired during your Networking Essentials studies. First, you will configure the IP addresses on network devices in a simplified network. Second, you will set up the wireless configurations in home network. Finally, you will verify your implementation by testing end-to-end connectivity by accessing the web server, www.server.pka, and router R1 using SSH in the simplified network.

Implementation

Router R1

  • Configure the device name according to the Addressing Table.
  • Configure the IP address on G0/1 interface according to the IP addressing table and enable the interface.
  • Create a banner that warns anyone accessing the device that unauthorized access is prohibited. Make sure to include the word warning in the banner.
  • Assign cisco as the console password and enable login.
  • Assign class as the encrypted privileged EXEC mode password.
  • Encrypt all plaintext passwords.

Configure SSH on R1:

  • Set the domain name to networking.pka
  • Generate a 1024-bit RSA key.
  • Create a user with a username admin with password cisco123
  • Configure the VTY lines for SSH access.
  • Use the local user profiles for authentication.

Switch S1

  • Configure the device name according to the Addressing Table.
  • Configure the IP address of the switch on SVI interface according to the IP addressing table and enable the interface.

Server

Configure the IP address of the server according to the IP addressing table.

Wireless Router in the Home

Enter the Home cluster. From the web browser on PC, configure the following:

Initial Wireless Router IP Address: ……………………… 192.168.1.1

Username / Password: ………………………………………..admin / admin

SSID: …………………………………………………………………MyHome

Security Mode: ……………………………………………………WPA2 Personal

Passphrase: ………………………………………………………..123Cisco

DHCP Configuration:

Wireless Router IP Address:……………………………….. 192.168.20.1

Starting IP Address: ……………………………………………192.168.20.101

Maximum Number:……………………………………………. 100

DNS 1: ……………………………………………………………… 209.165.201.30

End Devices in the Home

Configure the wireless settings so the end devices can access www.server.pka.

SSID: ……………………..MyHome

Security Mode:……….. WPA2 Personal or WPA2-PSK

Passphrase: ……………123Cisco

Note: For Tablet PC and Pda, use the Config tab for the wireless configurations.

Verify Connectivity

  • Verify that IP addresses are in the correct networks. All the end devices should be in 192.168.20.0/24 network. If they are not in the correct network, enter the following commands at the command prompt.
    PC> ipconfig /release
    PC> ipconfig /renew
  • Verify that all end devices in the Home can access www.server.pka.
  • Verify that all end devices in the Home can access R1 via SSH with password cisco123.
    PC> ssh –l admin 209.165.201.1

Script

Router R1

enable

configure t

hostname R1

interface g0/1

ip add 209.165.201.1 255.255.255.224

 no shutdown

 banner motd $Warning: Unauthorized access is prohibited!!$

line con 0

 password cisco

 login

enable secret class

service password-encryption

ip domain-name networking.pka

crypto key generate rsa

1024

username admin password cisco123

line vty 0 4

 transport input ssh

 login local

Switch S1

enable

configure t

hostname S1

interface vlan 1

 ip address 209.165.201.2 255.255.255.224

 no shutdown

Leave a comment

Your email address will not be published. Required fields are marked *